Printer Driver for TOS, MagiC & MiNT
Developed by Claude Labelle - Licensed under GPL

This driver intercepts the parallel port while a USB printer is connected. 
Applications can print normally, with or without a GDOS (NVDI 5 tested). 
Always send a form feed if the application have that option.

A printer with PCL5 (monochrome) or PCL5c (for color) emulation is 
recommended. PCL5e  (monochrome) should work. PCL3GUI does not work.

For a color printer, in NVDI, select printer "HP Deskjet 500/510/520" and 
set the colors to 16,7 millions. For a monochrome printer, or to print 
black only in 600 dpi on a color printer, select "HP Laserjet 6L". In 
ImageCopy, select "BIOS" for output and "CMY colour" for color or 
"monochrome" for monochrome. 

Color printing may not work correctly on all PCL5c printers, using the NVDI 
driver. It worked fine on Xerox Phaser 6022 tested.

The speed should be about the same than a parallel printer or faster due to 
a faster printer.

PDF and JPG files can be printed by dropping them on the desktop printer 
icon (TOS and MiNT), for printers that have the capability to internally 
process such files. With IMG2PCL from Lonny Pursell, you can print high 
quality images by dropping the PCL file onto the printer icon. See the 
GOODIES folder.

It is recommended to increase the job timeout to one minute, if that option 
is available on your printer. This is in case the processing of a page 
takes a long time on the computer.

This driver is to be considered a beta version. It has been tested on TOS, 
MagiC and MiNT, on TT, Falcon 030, Falcon CT63. It should work on ST. The 
only problem found was on Falcon CT63, for one user, Papyrus under TOS had 
problems, while for another, it was fine but it had problems under MagiC.
